Excellent adhesion/bond
- Enhances bond when skimming to interior above-grade monolithic concrete walls, ceilings, and columns.
- Stays strong – highly durable surface.
- Creates a variety of textures and dries white.
ProForm® Concrete Cover Joint Compound is a vinyl base ready mix compound specifically formulated for smoothing or texturing above-grade monolithic interior concrete ceilings and columns. It may be used for texturing drywall, embedding drywall tape, and as the first coat over drywall beads and trims.
Concrete Cover Joint Compound is specifically formulated for enhanced bond when applied to interior monolithic concrete ceilings and columns. It can be sprayed, brushed, rolled, trowel-applied, or applied with drywall finishing boxes and/or taping tools.
It provides an excellent bond for embedding drywall tape and laminating gypsum board and can be used to first-coat beads and trim and spot drywall fasteners. It develops its strength and hardness by drying.
By adjusting consistency and/or varying application techniques, it creates an almost endless variety of textures—the most typical are Smooth, Spray Spatter, Spatter Knock-Down, or Orange Peel.
Advantages
- Ideal for smoothing monolithic concrete ceilings.
- Excellent adhesion/bond.
- Creates a variety of textures.
- Dries white.
- Can be used for embedding drywall tape as well as a first-fill coat on drywall fasteners, beads, and trim.
- Ready to use right from the container.
- Mold resistant.
- Low VOC content - Less than 2 grams/liter.
Availability
- Atlantic Region
- Northeast
- Gulf Region
ProForm® Concrete Cover Joint Compound has achieved UL GREENGUARD Gold Certification.
Specifications
Products that suit any project criteria
Product Details
Applications:
Finishing
Packaging:
Pail
Coverage:
123-140 lbs/9 gal per 1,000 sq ft
Pail Volume:
61.7 lb
Related Resources
Product details and technical documentation
Frequently Asked Questions
Ready to answer your product and installation questions
Do you have mold resistant ready mix?
No material can be considered “mold-proof,” nor is it certain that any material will resist mold or mildew indefinitely. However, when used in conjunction with good design, handling, and construction practices, ProForm ready mix can provide increased mold resistance versus standard ready-mixed compounds. As with any building material, avoiding water exposure during handling, storage and installation and after installation is complete is the best way to avoid the formation of mold or mildew.
How much does a pail or carton of ready mix cover?
A good rule of thumb is to use nine gallons of ready mix for every 1000 sq ft of wallboard.
How should ready mix be stacked?
Ready mix pails or cartons should not be stacked more than two pallets high.
What is the shelf life of ready mix?
Nine months in good storage conditions. To prevent spoilage and freezing, maintain temperature at a minimum 50˚F (10˚C) and protect container from exposure to extreme heat and sunlight.
What happens if my ready mix freezes?
While not ideal, ProForm joint compound can go through up to 3 freeze-thaw cycles. Allow material to thaw at room temperature for at least 24 hours. When thawed, turn the container upside-down for at least 15 minutes. Turn pail right-side up, remove the lid and immediately remix with an electric drill. Ready mix should be lump-free and ready to use within 1 minute. Discard ready mix that does not remix to a lump-free consistency.
Tips & Tools
Detailed information to support your next project
Design & Resources
Review ProForm details and technical information in the Design & Resource Center.
Design & Resource CenterExpert Connection
Contact ProForm representatives who can help troubleshoot your project challenges.
Get StartedNeed Technical Information?
Call 1-800-NATIONAL®
National Gypsum Company is the exclusive service provider for products manufactured by ProForm Finishing Products, LLC.